World Class Products, Hometown Hobby Shop Service
Go to wishlist Wishlist

Shopping cart

Your cart is currently empty

Product image slideshow Items

  • Beacon Foam-Tac Adhesive 1 oz.

Beacon Foam-Tac Adhesive 1 oz.

Article number: BEABC1
Excl. tax

In stock

Available in store

  • Excellent for building or repairing remote control air planes.
  • Foam-safe glue bonds Depron, EPS, EPP, XPS, EPO, and many other types of foam as well as carbon fiber and wood.
  • Does not attack, melt or dissolve foams but holds quickly and cleanly.
  • Remains flexible and clear once dry, never brittle. Super strong bond is like welding the foam together.
  • Requires much less glue for a permanent bond than a cyanoacrylate-based glue.
  • Great for making glue hinges.
  • Will not glue fingers together

Hands down, Foam-Tac is the best choice for building and repairing all parts of foam planes including motor mounts, control horns and rods, attaching servos, and tacking down wires.

Foam-Tac’s improved formula now contains UV blockers so that it can be used in the field in direct sunlight without any yellowing or degrading. We’ve also added a special adhesion promoter to make the glue even stronger and more durable than before.

FOAM-TAC offers many advantages over other types of glues that have been used on R/C planes. Since a little Foam-Tac goes a long way, you’ll build plane after plane with one bottle, saving time, money and materials.

Directions for Use

All surfaces must be clean, dry, and free of dust and grease.

Remove white cap & save for storage.

Apply a thin layer of glue to each side of materials to be joined.

Wait a few seconds and then firmly press parts together and immediately separate for 4-5 seconds more.

Rejoin parts, firmly pressing surfaces together for a permanent bond.

Allow to dry for 15-20 minutes.

Full cure within 2-14 hours.

You might also like