This is the Tamiya Subaru Impreza WRX Sti Kit. The Tamiya R/C assembly kit precisely replicates the Subaru Impreza in every detail for Rally R/C enthusiasts looking for the next level in a performance and realism.

Article number: TAM58528
Quantity: 1

The 4WD XV-01 chassis offers dynamic R/C rally driving on both tarmac and gravel surfaces. It features a front-motor, belt-driven 4WD layout with front and rear enclosed gearboxes equipped with gear differential units. The box-like main frame incorporates covers and wheel well liners to provide superb protection against dirt and debris. The 4-wheel double wishbone suspension ensures plenty of suspension stroke and ground clearance and is matched with Rally Block Tires on replica wheels for realistic handling.

Includes: XV-01 Pro Chassis Kit with Shocks, Shock Oil, Tires, Foam Inserts, Wheels, Decals, Spur Gear, Pinion Gear, Clear Body and Instruction Manual


  • Radio: 2-channel with high-speed steering servo
  • ESC: For 540 size brushed motor, must handle at least 23 turn motor
  • Battery: 7.2V 6-cell stick pack with Standard connector
  • Building and track equipment 


  • Chassis: Molded plastic with front and rear wheel well liners for protection against mud
  • Drive: Four wheel reinforced belt drive
  • Motor: 540 size brushed
  • Differentials: Bevel gear
  • Steering: Long tie-rod system to reduce bump steer, high torque servo saver
  • Suspension: Double wishbone, reversible rear suspension for off-road driving and toe angle setting changes
  • Ball Bearings: Full set
  • Shocks: CVA oil-filled plastic body
  • Battery Access: Hatch on underside of chassis
  • Tires: Rally block 1.02" (26mm) wide, 2.6" (65.4mm) diameter with foam inserts
  • Wheels: 16 spoke white plastic, 1" (25.4mm) wide, 1.9" (48mm) diameter, 12mm hex
  • Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Caster: Adjustable, front and rear caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis
  • Body: Clear untrimmed polycarbonate
  • Bumper: Front, urethane foam
  • Spur Gear: 68 tooth plastic
  • Pinion Gear: 22 tooth steel



  • Length: 15.1" (384mm)
  • Width: 7.3" (185mm)
  • Wheelbase: 10.1" (257mm) 


  • Length: 17" (432mm)
  • Width: 7" (178mm)
  • Height: 4.1" (105mm)
0 stars based on 0 reviews