Paris Junction Hobbies RC Boats and Kits

World Class Products With Home Town Service
Copyright © 2004-2009 Paris Junction Hobbies All Rights Reserved

Part #
Aquacraft Reef Racer 2 EP RTR
Specification:
- 6 colors and 6 channels available so everyone can join in the fun
- Sealed compartments for electronics and battery
- Length: 15 in (380 mm), Beam: 5.3 in (145 mm)
- Powerful water cooled 380 motor
- unique self-righting design keeps you running
Includes: 2-channel pistol grip radio w/1 mini servo and ESC, 7.2V 1100mAh NiMH battery pack and 30-minute 12V field charger.

Requires: 8 "AA" batteries for the transmitter

Part #
Aquacraft Hammer EP RTR
Specification:
- Length: 24 in (610 mm)
- Realistic deep vee racer looks
- 550-size electric motor equipped with a water-cooled jacket
- Waterproof radio compartment
- 6 colors and 6 channels available

Includes a 2-channel pistol grip radio made by Futaba

Requires: 6-7 cell battery, charger & 8 "AA" batteries.

Part #
Proboat Apache Catamaran EP RTR

Specification:
- Water-cooled motor lowers running temperatures for increased motor life
- Steerable drive system offers better speed and handling
- Electronic speed control with reverse
- Pro Boat 2-channel AM pistol-grip radio system
- Magnetic hatch keeps electronics dry
- Catamaran hull provides stable handling in rough waters

Requires: 6-7 cell battery, charger & 8 "AA" batteries.

Part #
Proboat Shockwave 36 Nitro RTR

Specification:
- Water-cooled Dynamite® .32 marine w/ Tiger Drive and electric starter
- Stainless steel and aluminum running hardware
- Length: 36 in., Beam: 9 in.
- Pre-painted fiberglass hull
- Pro Boat™ AM 27mHz Pistol grip radio system
- Speeds over 35 mph

Requires: Fuel, Fuel bottle, Rx battery and glow igniter, 8 "AA" batteries for transmitter

Part #
Proboat Mini V EP RTR

Specification:
- Durable deep-V hull
- Steerable drive system for superior handling
- Electronic speed control with reverse and 380-size electric motor
- Pro Boat 2-channel 27MHz AM pistol-grip radio
- Available in white, red and yellow.
- Battery and charger included

Requires: 8 "AA" batteries for transmitter

Part #
Osborn Models Miss Canada III Kit

Specification:
Laser cut 1/24 scale static display model of the sleek stepped hydro.
Length 12.25”
Beam 3.5”
Also available as a 1/12 or 1/6 scale RC kit

Requires: Glue and paint

Part #
Osborn Models Miss Super Test III Kit

Specification:
Laser cut 1/24 scale static display of the famous Harmsworth trophy winner.
All plywood construction with vacuumed formed cowl and engine and authentic scale decals.
Length 15”
Width 6.25”
Also available as a 1/12 scale RC kit

Requires: Glue and paint

Part #
Osborn Models Mirror Dinghy Kit

Laser cut 1/12 scale static display kit
The kit includes: Laser cut parts, Detailed instructions, Realistic sails, Rigging hardware and Display stand
Length 11”
Beam 4.75”
Mast Height 16”
Also available as a 1/6 RC kit

Requires: Glue and paint

Part #
Osborn Models Utility Runabout Kit

Specification:
The Utility Runabout is a 1/12 scale laser cut model of a typical classic mahogany runabout. This type of boat was used on lakes all over North America. Requires two channel radio, battery pack and speed controller. Kit includes a 280 size motor and running hardware.
Length 16”
Beam 5.5”
1.25lbs ready to run

Requires: Glue and paint

These are just a few of the boats we carry. Contact us for more information on the model of your choice. We can supply also a broad selection of upgrades, parts and fuel for your boats.