Paris Junction Hobbies RC Batteries and Chargers

Part # BC6
Bantam BC6 AC/DC Multi Chemistry Battery Charger and Balancer

The BC-6 is AC and DC compatible right out of the box, no external power adapter needed. Charge up to 16 cells of NiCd/NiMH and 6S of Lithium batteries with a maximum charge rate of 5.0A.
The BC-6 has an individual-cell-voltage balancer built in, so you won't need an external balancer when charging Lithium batteries (Li-Ion/LiPo/LiFe).

Requires adapter board for your brand of battery

Part # BC6-10
Bantam BC6-10 DC Multi Chemistry Battery Charger and Balancer

Charges at up to a 10A rate
The BC6-10 will get your batteries charged up and ready to go faster than ever with a potential 200W of power output and a charge rate up to 10A. Charges up to 16 cells of NiCd/NiMH and 6S of Lithium batteries with a maximum charge rate of 10.0A.
The BC6-10 has an individual-cell-voltage balancer built in, so you won't need an external balancer when charging Lithium batteries (Li-Ion/LiPo/LiFe).

Requires 12-16 volt DC power supply and adapter board for your brand of battery

Part # 301DX
Bantam 301 DX DC Multi Chemistry Battery Charger

The 301 DX is your all-in-one charging and discharging solution for Lipo, NiCd, NiMH and lead acid batteries. It provides detailed information on your batteries throughout the charging process, including voltage, charge rate, charge time and mAh charged/discharged from the pack. The 301 DX also makes safety a priority, with a high-temp cutoff, safety timer, and high and low-capacity cut-offs.Charges up to 5 Lipo cells or 14 NiCD/MH cells. Max charge rate of 5A. Combine the 301 DX with any of our balancers (Ultra Balancer, Balance Pro or PB6) and our Octopus adapter, and you'll have a balancing and charging for 95% of the lipos on the market.

Requires 12-16 volt DC power source

Part # ORI30126
Team Orion Clubman DC Multi Chemistry Battery Charger
.
Microprocessor controlled charger for NiMH, NiCd, LiPo, and LiFe batteries
Linear charge current 0.1 – 6A and Discharge up to 1A
Integrated balancer with special storage charge function
Automatic charge cutoff using delta-peak technology and adjustable discharge cut-off
Extra safety by interrupting the charge when capacity reaches a preset value
10 profile memory

Requires 12-16 volt DC power supply

Part # DYN4066
Dynamite AC/DC Lipo Battery Charger
.
Integrated 1-6S Li-Po balancer with JST-XH connector works with most Li-Po batteries (THP and Losi balance adapters available separately)
1 to 5-amp selectable charge rates for charging 2–6S Li-Po/Li-Fe batteries
AC/DC input provides flexible charging capabilities
Included adapters feature charge outputs for Deans Ultra plug and banana to receiver and BEC-style adapters
LED and beeper charge status indicators and reverse and short circuit portection

Operates on AC or DC

Part #977
MRC Super Brain 977 Multi Chemistry Charger with 10 amp Power Supply

Charges 1-9 NiCd, NiMH, Gel Cell and Lead Acid and 1-3S Lithium Polymer, Lithium Ion, batteries
Capable of charging two batteries at the same time even if they are different voltages and/or battery types
Charge rate with 0.10A increments from 0.20-5.0A
Discharge function for increased battery life, discharge rate with 0.10A increments from 0.20-4.0A
Large LCD screen shows battery voltage, charge rate, peak threshold, capacity, number of cells in pack and elapsed time
10 amp fan cooled power supply included

Part # DYN4066
Dynamite AC/DC Nicd / Nimh AC/DC Battery Charger
.
4- to 8-cell Ni-Cd or Ni-MH compatibility
Selectable 1A or 2A charge rates (4A, DC only)
LED and audible charge state indicators
Short circuit and reverse polarity protection
Includes alligator clips for DC charging

Operates on AC or DC